GCS for CC3D, Atom
Downloading and Installing Ground Control Station LibrePilot Downloading the GCS installer Installation of the GCS OpenPilot Downloading the GCS installer
Read moreBootloaders for APM2.x
Bootloader for APM2.x autopilot series Bootloader for: 32u2 MCU Bootloader for: 2560 MCU You need AVR programmer with ISP connector to burn
Read morePixracer R15
PixRacer has all the capabilities of the original Pixhawk (including version 2) and even more! It is optimized in size
Read morePX4 Safety Switch
Safety Switch A safety switch can be used to enable/disable the outputs to motors and servos. LED meaning Constant blinking
Read moreBluetooth Telemetry radio
A Bluetooth Data Link can be used to connect your Pixhawk (or other controller) to your Bluetooth enabled PC or Android Ground
Read moreVTOL Search & Rescue
VTOL Search & Rescue systems provide an extremely versatile solution for life saving applications. Combining the range and endurance of
Read morePX4:Bootloader Update
The PX4 bootloader is used to load firmware for Pixhawk boards (PX4FMU, PX4IO) and PX4FLOW. This topic explains several methods for updating the
Read morePX4:Loading Firmware
QGroundControl desktop versions can install PX4 Pro or ArduPilot firmware onto Pixhawk-family flight-controller boards. By default QGC will install the current stable version of the selected
Read morePX4 Autopilot User Guide (v1.9.0)
https://docs.px4.io/v1.9.0/en/ https://docs.qgroundcontrol.com/en/
Read moreFlight Controls/Commands
All flying, including takeoff and landing, is controlled using the 4 basic commands: roll, yaw, pitch and throttle. In order
Read more500MW：How to use Radio Telemetry For PIXHAWK flight controller?
1.use 6P line connects to pixhawk flight controller. Due to the different firmware, some firmware, two ports can be used,
Read moreInstalling Mission Planner (Windows)
The below instructions show how to install Mission Planner on Windows. These instructions will be suitable for most users. For advanced users
Read more500MW:How to use Radio Telemetry?
Note: radio telemetry may interfere with GPS satellite search. Radio telemetry should stay away from GPS, flight control and other
Read moreSP Racing F3 6D0F
1.We had uploaded the beataflight firmware, no need to upload firmware. 2. the betaflght code for F3 is out of
Read moreAPM2.9 with internal compass,support SBUS
APM2.9 is used in the same way as APM2.6, 2.8. The benefit is that APM 2.9 supportsSBUS receiver protocols.Why use
Read moreSP Racing F3 10D0F
1.We had uploaded the beataflight firmware, no need to upload firmware. 2. the betaflght code for F3 is out of
Read moreHow to use Radio Telemetry For PIXHAWK flight controller?
1.use 6P line connects to pixhawk flight controller. Due to the different firmware, some firmware, two ports can be used,
Read moreHow to use Radio Telemetry For APM flight controller?
1.use 5pin Line connect to APM flight controller. 2.Please NOTE： When using Radio Telemetry connection, it must use 3DR Power
Read moreAPM2.9 without internal compass,support SBUS
APM2.9 is used in the same way as APM2.6, 2.8. The benefit is that APM 2.9 supports SBUS receiver protocols.Why
Read moreHow to use Radio Telemetry?
Note: radio telemetry may interfere with GPS satellite search. Radio telemetry should stay away from GPS, flight control and other
Read moreHOW to use airspeed sensor
Upload Plane firmware, airspeed only can be supported for Plane firmware, do not use for Copter or other. 2.Connect Dynamic
Read moreAPM2.9 without internal compass,support PPM
APM2.9 is used in the same way as APM2.6, 2.8. The benefit is that APM 2.9 supports PPM receiver protocols.Why
Read moreAPM2.9 with internal compass,support PPM
APM2.9 is used in the same way as APM2.6, 2.8，the hardware is same. The benefit is that APM 2.9 supports
Read moreAPM2.9 without internal compass,support PPM
APM2.9 is used in the same way as APM2.6, 2.8. The benefit is that APM 2.9 supports PPM receiver protocols.Why
Read moreHOW to use OLED for PIXHAWK
Use OLED for PIXHAWK, must follow these steps, Connect OLED to I2C port of Pixhawk Upload ardupilot firmware, at least
Read moreHow to connect apm to mission planner
The apm connects to PC, make sure you have installed the Misson Planner, and select the right port and baud
Read moreAPM2.8 with internal compass
The mission planner will no longer be compatible with APM flight control starting from 1.3.76. Please download versions lower than
Read moreAPM2.8 without internal compass
How to upload firmware for APM? http://blog.rctoysky.com/?p=319 How to connect APM to Mission Planner? http://blog.rctoysky.com/?p=20 1.If want to use GPS module, the
Read more