How to configure a GPS for CC3D
More information,see here,https://opwiki.readthedocs.io/en/latest/user_manual/cc3d/gps.html CC3D or Atom flight controllers do not support GPS functions such as Return to base or Position
Read moreMonth: February 2020
LibrePilot/OpenPilot User Manual
https://opwiki.readthedocs.io/en/latest/user_manual/
Read moreGCS for CC3D, Atom
Downloading and Installing Ground Control Station LibrePilot Downloading the GCS installer Installation of the GCS OpenPilot Downloading the GCS installer
Read moreBootloaders for APM2.x
Bootloader for APM2.x autopilot series Bootloader for: 32u2 MCU Bootloader for: 2560 MCU You need AVR programmer with ISP connector to burn
Read morePixracer R15
PixRacer has all the capabilities of the original Pixhawk (including version 2) and even more! It is optimized in size
Read morePX4 Safety Switch
Safety Switch A safety switch can be used to enable/disable the outputs to motors and servos. LED meaning Constant blinking
Read moreBluetooth Telemetry radio
A Bluetooth Data Link can be used to connect your Pixhawk (or other controller) to your Bluetooth enabled PC or Android Ground
Read moreVTOL Search & Rescue
VTOL Search & Rescue systems provide an extremely versatile solution for life saving applications. Combining the range and endurance of
Read morePX4:Bootloader Update
The PX4 bootloader is used to load firmware for Pixhawk boards (PX4FMU, PX4IO) and PX4FLOW. This topic explains several methods for updating the
Read morePX4:Loading Firmware
QGroundControl desktop versions can install PX4 Pro or ArduPilot firmware onto Pixhawk-family flight-controller boards. By default QGC will install the current stable version of the selected
Read morePX4 Autopilot User Guide (v1.9.0)
https://docs.px4.io/v1.9.0/en/ https://docs.qgroundcontrol.com/en/
Read moreFlight Controls/Commands
All flying, including takeoff and landing, is controlled using the 4 basic commands: roll, yaw, pitch and throttle. In order
Read more500MW：How to use Radio Telemetry For PIXHAWK flight controller?
1.use 6P line connects to pixhawk flight controller. Due to the different firmware, some firmware, two ports can be used,
Read moreInstalling Mission Planner (Windows)
The below instructions show how to install Mission Planner on Windows. These instructions will be suitable for most users. For advanced users
Read more