7inch Flying Car FPV Drone Frame

MARK4 V2 7-inch

  • Material: 3K Carbon Fiber
  • Frame Type: H
  • Wheelbase: 300mm
  • Propeller Size: 7-inch
  • Size: 220*275mm
  • Weight: 177g
  • Top Plate: 2mm
  • Bottom Plate: 3mm
  • Arm: 6mm
  • Camera installation distance: 19mm-20mm
  • Image transmission installation hole distance: compatible 30.5mm/20mm
  • Flight control installation hole distance: compatible 30.5mm/20mm

Specification:

  • Flight control: F4/F7/H7
  • Motor: 2207 2807 2810 2812 (Note: Not all KV values are suitable. Use motors compatible with 7-inch propellers.)
  • Compatible Propellers:7-Inch Propellers
  • ESC: 45A-65A
  • Battery:4-6S

RC Car

Specification:

  • Model: 1:20 Electric 4WD Monster Truck
  • Outer Dimensions: 248 * 196 * 121mm
  • Clearance of the chassis from the ground: 13.6
  • Gear Ratio: 1:6
  • Tire Diameter: 62mm, Tire Width: 30.5mm
  • Motor: 370 Brushed Motor
  • Battery: Li-Po 7.4V / 500mAh
  • Charger: USB Charging Cabl
  • Charging Time: Approx. 2 Hours
  • Run Time: Approx. 9 Minutes
  • Top Speed: 40 km/h

Package include:

  • MARK4 V2 7inch Carbon Fiber Frame X1
  • RC Car Connector Board X1
  • Li-Po 7.4V / 500mAh X2
  • 35A Brushed ESC X1
  • 1:20 4WD RC Car Manual X1
  • USB Charger X1
  • Shock Springs X4