QGroundControl: Power redundancy not met: 0 instead of 1
change COM_POWER_COUNT from 1 to 0.Then save and reboot.
Read morechange COM_POWER_COUNT from 1 to 0.Then save and reboot.
Read moreSafety Switch A safety switch can be used to enable/disable the outputs to motors and servos. LED meaning Constant blinking
Read moreThe PX4 bootloader is used to load firmware for Pixhawk boards (PX4FMU, PX4IO) and PX4FLOW. This topic explains several methods for updating the
Read moreQGroundControl desktop versions can install PX4 Pro or ArduPilot firmware onto Pixhawk-family flight-controller boards. By default QGC will install the current stable version of the selected
Read morehttps://docs.px4.io/v1.9.0/en/ https://docs.qgroundcontrol.com/en/
Read more